Skip to content Skip to navigation Skip to footer
POLARIS OFF-ROAD VEHICLES

HELP CENTER

6/5/2020
Setting the Clock on Your ACE

The procedure to set the clock on your Polaris ACE varies based on what model of vehicle you own and which instrument cluster it features.

Digital Gauge

Digital gauge

The clock (6) can be found at the bottom of the display. It can be displayed in a 12-hour or 24-hour format.

To set the time or select between 12-hour or 24-hour formats, use the Options Menu. To get to the Options Menu, press and hold the MODE button. "OPTIONS" will display on the screen for 3 seconds before showing the first menu item.

To set the time, follow these steps and refer to the corresponding image below:

Clock menu

1. Press the MODE button.

2. Toggle the Up/Down buttons to change the units (12-hour or 24-hour format).

3. With the correct unit displayed, press the MODE button, which will set the unit.

4. Toggle the Up/Down buttons to change the units (cycles hours).

5. With the correct unit displayed, press the MODE button, which will set the unit.

6. Toggle the Up/Down buttons to change the units (cycles 10s of minutes).

7. With the correct unit displayed, press the MODE button, which will set the unit.

8. Toggle the Up/Down buttons to change the units (cycles 1s of minutes).

9. With the correct unit displayed, press the MODE button, which will set the unit and return to the Options Menu.

To exit the Options Menu, the user can select the Exit Menu function from the Options Menu; can hold the MODE button and exit out of the Options Menu; or not press any button for 10 seconds, which will exit out of the Options Menu.

2-Inch LCD Display

Instrument cluster

The clock can be found in the Rider Information Center (4) portion of the instrument cluster. It is located at the bottom of the screen, as shown below. Setting the clock requires the use of the MODE button (3).

Rider information center

The clock can display in either 12-hour or 24-hour formats. It is set to a 12-hour format at the factory.

To switch to the 24-hour format or switch back to the 12-hour format:

1. Turn the key to the OFF position.

2. Press and hold the MODE button while turning the key to the ON position.

3. When the display flashes the distance setting, tap the MODE button to advance to the desired setting, which is time.

12 or 24 hour format

4. Press and hold the MODE button to save the setting and advance to the next display option.

To exit the set-up mode at any time, wait 10 seconds. The display automatically exits and returns to the odometer display.

The clock will need to be reset any time the battery has been disconnected or discharged.

To set the clock:

1. Turn the key to the ON position. Use the MODE button to toggle to the odometer display.

Odometer display

2. Press and hold the MODE button until the hour segment flashes. Release the button.

3. With the segment flashing, tap the MODE button to advance to the desired hour setting.

4. Press and hold the MODE button until the next segment flashes. Release the button.

Set hour segment

5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After completing the 1-minute segment, step 4 will save the new settings and exit the clock mode.

Set 10 minute segment

Set 1 minute segment

6. Turn the key to the OFF position.

For more information on the instrument cluster on your ACE, consult your Owner's Manual.
Find a Polaris Dealer near you with the Dealer Locator.
To find diagrams and replacement part numbers, use the online parts catalog.

Keyword(s) clock , set , time , setting , change , changing , gauge