Listed below are the plow mount, frame and blade kits for Polaris ACE vehicles. Installation instructions are linked as well, which list the individual parts in each kit.
To order a replacement part for any aspect of your plow system, see your authorized Polaris Dealer. If you need a part not listed, also consult your Polaris Dealer.
Prior to purchasing, always check the installation instructions to ensure that the kit fits your ACE and that you have all of the necessary tools and hardware. To only view kits that fit your vehicle, visit the Accessories section of the ACE website and use the fitment tool, shown below, at the top of the page.
FRAMES
Glacier Pro Plow Frame (Part Number 2879630)
For more information, view the installation instructions. These instructions also list all of the parts included in the plow frame kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
Shear Pin (2205063):
In the event of a collision with an obstacle at a speed greater than that recommended for the system, the shear pin of the manual angulation mechanism will break to minimize the force of impact in the frame. If the shear pin is broken, see if another part is damaged. If any part is damaged, the impact velocity was greater than what the system is designed to support. You must then buy a replacement part from your Polaris Dealer.
If only the shear pin is broken, the pin can be removed and installed upside down and used again. Follow these steps to change the pin:
- Using a long nose pliers, remove the two tension springs (15) and then remove the pin retaining the angle lever (18).
- Remove the half-broken shear pin (21) and reinsert it upside down. You can get a new spare pin (23) from your Polaris Dealer.
- Put the pin back in place.
- Put the two tension springs back in place (15) using the long nose pliers.
Note: The shear pin is designed only to protect against the impacts affecting right and left ends of the plow. The pin does not protect the system from a central impact. Always check the entire system after a failure to ensure that no damage occurred on other parts than on the pin.
BLADES
Glacier Pro Plow Blade - 66-Inch Poly (Part Number 2880269)
For more information, view the installation instructions. These instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
Glacier Plow Blade - 60-Inch Steel (Part Number 2879638)
For more information, view the installation instructions. These instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
Glacier Plow Blade - 52-Inch Steel (Part Number 2879639)
For more information, view the installation instructions. These instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
Discontinued
Plow Mount (Part Number 2879634). For more information, view the installation instructions.
Integrated Plow Mount Frame Attachment (Part Number 2882107). For more information, view the installation instructions.
Shop the full collection of plow kits and parts.
For more on Polaris plow systems, listen to the The What, How and Why of Snow Plowing episode of the Polaris Podcast.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
To find replacement parts, view the online parts catalog.
YouTube® is a registered trademark of Google LLC
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.