Passer au contenu de la page Passer à la navigation Passer au pied de page
VÉHICULES POLARIS HORS ROUTE

CENTRE D'AIDE

2019-12-30
Parts for ACE Tracks

Certain Polaris ACE models can be equipped with Prospector Pro Tracks for all-terrain traction in winter weather. Listed below are the parts that make up the mounts and track kits for ACE vehicles. Included are diagrams and the part numbers for spare part kits. Each diagram and parts listing is specific to that particular mount or track kit.

To order a replacement part for any aspect of your track system, see your authorized Polaris Dealer. If you need a part not listed, also consult your Polaris Dealer.

To ensure a mount or tracks kit is compatible with your ACE, visit the accessories section of the ACE website and use the fitment tool at the top of the page.

Ace fit tool

MOUNTS

Prospector Pro Track Mount Kit (Part Number 2883019)

Mount kit

TRACK KITS

PROSPECTOR PRO Tracks (Part Numbers 2881025 and 2880020)
For more information, view the User Manual, which is universal for all models. The User Manual includes installation instructions, adjustment procedures, break-in information, maintenance tips, torque specifications and troubleshooting solutions.

Tracks

Weight: 71 pounds. Height front: 23.8 inches. Height rear: 23.2 inches. Length front: 40 inches. Length Rear: 42.5 inches. Width front/rear: 22 inches.

The following diagrams and tables list the parts included in the tracks kit. Identification numbers and letters correspond to the diagram above each table. To order a part or kit, see your Polaris Dealer.

Track drawing

Item Description Quantity Part Number
A Kit - Frame, Camoplast®, Cast, ATV 1 2205425
1 Upper Carrier 1
2 Hub Cap Polaris Assembly 1
3 HSBS, M6 - 1 x 10, 10.9 ZP 1
4 W, 9.9 x 6 x 0.9 AL 1
5 Sticker, Warning 1
6 Sticker - Polaris ATV 1
7 Sticker - Prospector Pro ATV 1
8 ERR, 35, 2.4 ZP, SHR - 137 1
9 Hub Bearing Kit 1 2205123

Track drawing

Item Description Quantity Part Number
B Kit - Frame, CMPLST, Plastic, FRT ATV 1 2205426
1 Front Plastic Base Assembly with Shafts 1
2 Track Guide 1 2205428
3 RWHS, 6 x 16, TX, ZP 6 2205428

Track drawing

Item Description Quantity Part Number
C Kit - Frame, Camoplast®, Plastic, RR, ATV 1 2205427
1 Rear Plastic Base Assembly with Shafts 1
2 Track Guide 1 2205428
3 RWHS, 6 x 16, TX, ZP 6 2205428

Track drawing

Item Description Quantity Part Number
D Kit - Sprocket, Camoplast®, 18 Tooth 1 2205433
1 Sprocket, Camoplast® XP, 18 Tooth 1
2 HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 4

Track drawing

Item Description Quantity Part Number
E Kit - Sprocket, Camoplast®, 20 Tooth 1 2205432
1 Sprocket - Camoplast® XP, 20 Tooth 1
2 HFSCS, M10 - 1.5 x 30, 10.9 ZP, TL, DIN6921 4

Track drawing

Item Description Quantity Part Number
H Kit - Hub, Camoplast®, 13 mm 1 2205434
1 Hub - Camoplast® XP 13 mm, Assembly 1
2 HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL DIN6921 4
3 ERR, 35, 2.4, ZP, SHR-137 1

Track drawing

Item Description Quantity Part Number
G Kit - Hub, Camoplast®, 32 mm 1 2205435
1 Hub-Camoplast® XP 32 mm, Assembly 1
2 HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 4
3 ERR, 35, 2.4, ZP, SHR-137 1

Track drawing

Item Description Quantity Part Number
H Kit -Wheel, Camoplast®, Mid, ATV 1 2205122
1 Wheel - ATV 134 mm 1
2 2 Lips Cap, 2-inch OD Tube 1
3 HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 1
4 Wheel Seal (25 ID x 42 OD) 1

Track drawing

Item Description Quantity Part Number
i Kit -Wheel, Camoplast®, Idler, ATV 1 2205121
1 202 mm ATV Wheel 1
2 2 Lips Cap, 2-inch OD Tube 1
3 HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 1
4 Wheel Seal (25 ID x 42 OD) 1

Track drawing

Item Description Quantity Part Number
J Kit -Rocker, Camoplast®, Outer, ATV 1 2205431
1 ATV Stabilizer Assembly Male 1
2 Wheel - 134 mm ATV 2
3 2 Lips Cap, 2-inch OD Tube 2
4 HCSW, M10 - 1.5 x 25, 8.8, ZP, TL DIN933 2
5 Rubber Cone, Stabilizer 1
6 Wheel Seal (25 ID x 42 OD) 2

Track drawing

Item Description Quantity Part Number
K Kit -Rocker, Camoplast®, Inner, ATV 1 2205430
1 ATV Stabilizer Female Assembly 1
2 Dust Cap, Stabilizer 1
3 HCS, M10 - 1.5 x 45, 10.9, ZP, TL, DIN931 1
4 W, 7/16 x 1.0 x 0.072, 8, ZP, USS 1

Track drawing

Item Description Quantity Part Number
L Kit - Bearings, Camoplast®, ATV 1 2205123
1 Internal Spacer 1
2 Standard Bearing 2
3 Shaft Seal - 50 x 62 x 10 TC 1

Track drawing

Item Description Quantity Part Number
M Kit - Track Adjuster, Camoplast®, ATV 1 2205429
1 Extruded Track Tensioner 1
2 CB, M10 - 1.5 x 70, 8.8, ZP, DIN603 1
3 Tensioner Bushing 1
4 W, 20 x 10.5 x 2, ZP, DIN125A 1
5 FNN, M10- 1.5, 8 ZP, DIN6926 1
6 Tensioner Rod - Hex Nut Assembly 1
7 Sticker - Loosen 1

Track drawing

Item Description Quantity Part Number
N Kit - Hyfax, Camoplast®, ATV 1 2205428
1 Track Guide 1
2 RWHS, 6 x 16, TX, ZP 6

Track drawing

Item Description Quantity Part Number
O Kit - Anti-Rotation, Camoplast®, ATV 1 2205438
1 Short Anti-Rotation Tubing Weldment 1
2 HCS, M10 - 1.5 x 60, 10.9 ZP, DIN931 1
3 HFSCS, M12 - 1.75 x 50, 8.8 ZP, Full Thread 1
4 X-Long Rod End 1
5 Bushing Spacer 1
6 W, 374 x 13 x 3, ZP, DIN9021 1
7 W, 7/16 x 1.0 x 0.072, 8 ZP, USS 1
8 FNN, M10 - 1.5, 8, ZP, DIN6926 1
9 Stabilizing Rod Spring 1
10 Rubber Damper 1

Track drawing

Item Description Quantity Part Number
P Kit - Rear Damper, Camoplast®, ATV 1 2205452
1 HCSW, M10 - 1.5 x 25, 8.8, ZP, TL, DIN933 2
2 Wheel Axle, Stabilizer 2
3 Axle, Rear Stabilizer 1
4 Rubber Cone, Stabilizer 2

Track drawing

Item Description Quantity Part Number
Q Kit - Hardware, Camoplast®, ATV 1 2205125
1 Sprocket Scraper 1
2 HSBS, M6 - 1 x 10, 10.9, ZP 1
3 HCSW, M10- 1.5 x 25, 8.8 ZP, TL, DIN933 12
4 HFSCS, M10 - 1.5 x 30, 10.9, ZP, TL, DIN6921 4
5 CB, M10 - 1.5 x 70, 8.8, ZP, DIN603 1
6 HSFS, M10 - 1.5 x 80, 10.9 ZP 2
7 Spacer Washer 2
8 Tensioner Bushing 1
9 Alignment Shim Casting 1
10 W, 9.9 x 6 x 0.9, AL 1
11 W, 20 x 10.5 x 2, ZP, DIN125A 1
12 W, 1-1/4 x 3/8 x 1/8 ZP 2
13 NN, M10 - 1.5, ZP, 8 DIN982 2
14 FNN, M10 - 1.5, 8 ZP, DIN6926 1
15 Axle, Rear Stabilizer 1
16 Tensioner Rod - Hex Nut Assembly 1
17 Rubber Cone, Stabilizer 2
18 RWHS, 6 x 16, TX, ZP 6
19 ERR, 35, 2.4, ZP, SHR-137 1

Track drawing

Item Description Quantity Part Number
R Kit - Anti-Rotation Bracket 1 2205448
1 Main Plate, Universal Anti-Rotation 1
2 HCS, M10 - 1.5 x 80, 10.9, ZP, DIN931 2
3 W, 25 x 11 x 2, 8 ZP, USS 4
4 FNN, M10 - 1.5, 8, ZP, DIN 69261 2
5 Retainer, Anti-Rotation 1

Track drawing

Item Description Quantity Part Number
S Kit - Decals, Camoplast®, ATV 1 2205452
1 Hub Cap Polaris Assembly 1
2 Sticker - Loosen 1
3 Sticker - Warning 1
4 Sticker - Polaris ATV 1
5 Sticker - Prospector Pro ATV 1

Track drawing

Item Description Quantity Part Number
T Kit - Caps 1 2205120
1 2 Lips Cap, 1-3/4-inch OD Tube 1
2 2 Lips Cap, 2-inch OD Tube 1
3 2 Lips Cap, 2-inch OD Tube 12
4 Dust Cap, Stabilizer 1
5 Hub Cap Polaris Assembly 1

Track drawing

Item Description Quantity Part Number
U Track - Camoplast®, Front, ATV 1 5414840

Track drawing

Item Description Quantity Part Number
V Track - Camoplast®, Rear, ATV 1 5414841

Track drawing

Item Description Quantity Part Number
W Rubber Cone, Stabilizer 1 2205461
X ERR, 35, 2.4, ZP, SHR-137 1 2205454

Camoplast® is a registered trademark of Camoplast Solideal Inc.

Mots-clés track , tracks , mount , part , parts , spare , kit , replace , replacement